Granular sludge (GS) is a special self-aggregation biofilm. Extracellular polymeric substances (EPS) are mainly associated with the architectural structure, rheological behaviour and functional stability of fine granules, given that their significance to the physicochemical features of the biomass catalysing the biological purification process. This review targets the EPS excretion from GS and introduces newly identified EPS components, EPS distribution in different granules, how to effectively extract and recover EPS from granules, key parameters affecting EPS production, and the potential applications of EPS-based biomaterials. GS-based EPS components are highly diverse and a series of new contents are highlighted. Due to high diversity, emerging extraction standards are proposed and recovery process is capturing particular attention. The major components of EPS are found to be polysaccharides and proteins, which manifest a larger diversity of relative abundance, structures, physical and chemical characteristics, leading to the possibility to sustainably recover raw materials. EPS-based biomaterials not only act as alternatives to synthetic polymers in several applications but also figure in innovative industrial/environmental applications, including gel-forming materials for paper industry, biosorbents, cement curing materials, and flame retardant materials. In the upcoming years, it is foreseen that productions of EPS-based biomaterials from renewable origins would make a significant contribution to the advancement of the circular economy.

Selection of appropriate extraction methods of extracellular polymeric substances (EPSs)is crucial, affecting the yield, composition and the properties of EPSs. However, there is still a lack of standard methods for EPS extraction. In this study, seven methods were compared to extract EPS from anaerobic ammonium oxidation (anammox)granules, and the effectiveness and cell lysis of these methods were evaluated. The heating-Na₂CO₃ based method obtained a higher EPS yield with limited cell lysis. Proteins (PN)and polysaccharides (PS)were predominant in extractable EPSs. Particularly, PN-related substances were substantially enriched and high PN/PS ratios resulted in most methods. Different methods resulted in EPSs with a different size distribution. By analysis of Attenuated total reflectance-Fourier transform infrared spectra (ATR-FTIR), amide- and polysaccharide-associated bands were dominant. ATR-FTIR and fluorescence density of excitation-emission matrix spectra indicated EPS compositions and structures varied with the extraction methods. Moreover, the extraction/recovery protocol based on the heating-Na₂CO₃ method was remarkably improved, by varying heating time and using a centrifugal filter device with membrane (CFDM)to replace concentration and purification steps. Eventually, the thermal method with an extraction time of 45 mins was identified to be most effective. The application of CFDM was demonstrated as an alternative approach to concentrate and purify for EPS recovery. To our best knowledge, this is the first original study to systematically evaluate the different EPS extraction methods from anammox granules.