The advantages of using point clouds for change detection analysis include comprehensive spatial and temporal representation, as well as high precision and accuracy in the calculations. These benefits make point clouds a powerful data type for spatio-temporal analysis. Nevertheless, most current change detection methods have been specifically designed and utilized for raster data. This research aims to identify the most suitable cloud-to-cloud (c2c) distance calculation algorithm for further implementation in change detection for spatio-temporal point clouds. Eight different methods, varying in complexity and execution time, are compared without converting the point cloud data into rasters. Hourly point cloud data from monitoring a beach-dune system's dynamics is used to carry out the comparison. The c2c distance methods are (1) the nearest neighbor, (2) least squares plane, (3) linear interpolation, (4) quadratic (height function), (5) 2.5D triangulation, (6) natural neighbor interpolation (NNI), (7) inverse distance weight (IDW) and (8) multiscale model to model cloud comparison (M3C2). We evaluate these algorithms, considering both the accuracy of the calculated distance and the execution time. The results can be valuable for analyzing and monitoring the (build) environment with spatio-temporal point cloud data.@en

Change detection in the built environment is essential for sustainable development practices including Urban Planning and Development, Environmental Monitoring, and Conservation. Change detection provides valuable insights into dynamic processes, facilitates informed decision making, and supports sustainable development initiatives. Point clouds serve as foundational data sources for change detection in built environments, enabling analysts to detect, quantify, and interpret spatial changes with unparalleled accuracy and granularity. By leveraging the inherent characteristics of point clouds, researchers and practitioners can gain valuable insights into dynamic processes, inform decision making, and foster sustainable development in an ever-evolving built environment. We present the preliminary results of cloud-to-cloud (c2c) distance calculations for further change detection analysis of the entire Netherlands. This study utilises point cloud data from AHN2, 3, and 4 (Actueel Hoogtebestand Nederland1, The Netherlands). A method based on a 3D space-filling curve (SFC) was developed to calculate the c2c distances between AHN2, 3, and 4. This SFC method will allow change detection analysis to be carried out for the entire Netherlands. The change detection analysis outcomes can be accessed for future analysis in Potree2, a web-based point cloud rendered for large point clouds. The final implementation will allow the visualisation of AHN point clouds and their attributes, among which is the change in detection-related information. This research contributes to sustainable development practices by offering enhanced spatial insights and informed decision-making tools for further analysis and monitoring of the (built) environment in the Netherlands. [...]@en

Cloud-to-cloud (C2C) distance calculations are frequently performed as an initial stage in change detection and spatiotemporal analysis with point clouds. There are various methods for calculating C2C distance, also called inter-point distance, which refers to the distance between two corresponding point clouds captured at different epochs. These methods can be classified from simple to complex, with more steps and calculations required for the latter. Generally, it is assumed that a more complex method will result in a more precise calculation of inter-point distance, but this assumption is rarely evaluated. This paper compares eight commonly used methods for calculating the inter-point distance. The results indicate that the accuracy of distance calculations depends on the chosen method and a characteristic related to the point density, the intra-point distance, which refers to the distance between points within the same point cloud. The results are helpful for applications that analyze spatiotemporal point clouds for change detection. The findings will be helpful in future applications, including analyzing spatiotemporal point clouds for change detection.@en

This study investigates the feasibility of directly utilizing 3D indoor point clouds for real-time indoor navigation, particularly to enhance emergency response processes. Traditional indoor navigation research primarily focuses on creating navigation systems from pre-existing indoor models, resulting in a graph representation that simplifies spatial relationships, requires post-processing, and delivers results only afterwards, often overlooking real-time obstacles and complex layouts such as those in modern office floors. This research proposes an original approach by leveraging real-time generated 3D models using HoloLens 2 sensors, which combine RGB images and depth sensor output to create a comprehensive point cloud. The study explores path planning directly within these point clouds without the need for extensive preprocessing or segmentation, aiming to provide immediate navigation support with minimal delay. Utilizing the Rapidly Exploring Random Trees (RRT) algorithm, the research seeks to minimize preprocessing and swiftly visualize navigable paths, evaluating the system's performance in terms of processing time and path viability. This approach addresses the limitations of traditional graph-based methods and the challenges posed by outdated or unavailable indoor models, offering a promising solution for real-time emergency navigation assistance.@en

The objective of this paper is to investigate and propose a method for Indoor Localisation based on Isovists, with the aim of extending the fields of Location-based Services and Geomatics. Various methods and combinations incorporating Isovist concepts, Space Syntax, and visibility graphs are examined and assessed. By investigating these approaches, this study aims to create a comprehensive methodology to achieve localisation using Isovists. The main conclusion drawn from this research is that an Indoor Localisation method based on Isovists is not only feasible but can also effectively support Location-based Services. The analysis and evaluation of all the components have been thoroughly conducted, indicating that when properly integrated, they can provide substantial value for LBS applications. As this is a new method for Indoor Localisation, there is significant scope for future work, particularly in terms of connecting it with existing techniques and integrating them into user applications.@en

Localisation and navigation technologies have vastly evolved during the last years, facilitating users’ guidance in various environments. Unlike outdoor environments where GNSS comprises a universal solution, in indoor environments various localisation techniques have been used, each one with its drawbacks. Thus, this research investigates the reliability of the ceilings towards indoor localisation, by using components that are included in a simple mobile device. The choice of ceilings lies in their advantages, which include the incorporation of various characteristic components, as well as the absence of obstacles between them and the sensor. Indoor localisation is achieved based on LiDAR point clouds and images from RGB sensors of mobile devices. Additionally, this research involves location tracking of different users, to discover different movement patterns in an indoor facility. The proposed methodology revealed the robustness of the Coloured ICP algorithm for in-door localisation based on point clouds, both in terms of time efficiency and quality, while the combination of the SURF feature detector and SIFT descriptor provides the optimal indoor localisation results with image data. The proposed pipeline revealed encouraging results for use in emergencies, based on static data acquisition of a user, while it is also suitable for dynamic applications, in case a sensor is mounted on an automated device for indoor mapping operations. The captured point clouds of the ceilings can also be used as a reference to CAD and BIM models, to help the modelling of the existing utilities and their components in an indoor facility.@en

Point clouds contain high detail and high accuracy geometry representation of the scanned Earth surface parts. To manage the huge amount of data, the point clouds are traditionally organized on location and map-scale; e.g. in an octree structure, where top-levels of the tree contain few points suitable for small scale overviews and lower levels of the tree contain more points suitable for large scale detailed views. The drawback of this solution is that it is based on discrete levels, causing visual artifacts in the form of data density shocks when creating the commonly used perspective views. This paper presents a method based on an optimized distribution of points over continuous levels, avoiding the visualization shocks. The traditional distribution ratio's of data amounts over discrete levels of raster or vector data is considered the reference. How to convert this to point clouds with continuous levels (still benefiting from the proven advantages of the data distribution in discrete levels for efficient access at a wide range of scales)? In our solution, for each point a cLoD (continuous Level of Detail) value is computed and added as dimension to the point. A SFC (Space Filling Curve)-based nD data clustering technique can be used to organize the points, so that they can be efficiently queried. It should be noted that also other multi-dimensional indexing and clustering techniques could be applied to realize continuous levels based on the cLoD value. Besides the mathematical foundation of the approach also several implementations are described, varying from a 3D web-browser based solution to an augmented reality point cloud app in a mobile phone. The cLoD enables interactive real-time visualization using perspective views without data density shocks, while supporting continuous zoom-in/out and progressive data streaming between server and client. The described cLoD based approach is generic and supports different types of point clouds: from airborne, terrestrial, mobile and indoor laser scanning, but also from dense matching optical imagery or multi-beam echo soundings.

@en

Point cloud is made up of a multitude of three-dimensional (3D) points with one or more attributes attached. Point cloud is the third data paradigm in addition to the well-established object (vector) and gridded (raster) representations, since point cloud data can be directly collected, computed, stored, and analyzed without converting to other types. Modern ways of data acquisition, including laser scanning from airborne, mobile, or static platforms, multi-beam echo-sounding, and dense image matching from photos, generate millions to trillions of 3D points with attached attributes. If the collection is carried out in different periods, one of the essential attributes is precisely time, allowing spatiotemporal analysis to be performed. Its use is widespread in some fields such as metrology and quality inspection, virtual reality, indoor/outdoor navigation, object detection, vegetation monitoring, building modeling, cultural heritage, and diverse visualization applications. There are some examples in fields related to hydroinformatics, mainly related to terrain modeling. Due to its nature of big data, over the past decades, a series of developments have been carried out in the different processing chains for the optimal use of point cloud. This research seeks to introduce the various point cloud developments from which the hydroinformatics community and research could benefit. A review of recent advances is made, mainly including the analysis and visualization of point cloud for dealing with water-related problems. Potential areas of application and development in hydroinformatics are identified. These include, for example, the topics of coastal monitoring, coastal erosion, shallow water assessment, ice sheet change analysis, sea-level rise assessment, monitoring of levels in water bodies, crop and vegetation monitoring, analysis of the effects of groundwater depletion, detail tracing of basins and channels, analysis of floods with detailed terrain models, and drought monitoring in crops and forests. The challenges to overcome and ongoing developments regarding point cloud application in hydroinformatics are also discussed.@en

Point cloud data have rich semantic representations and can benefit various applications towards a digital twin. However, they are unordered and anisotropically distributed, thus being unsuitable for a typical Convolutional Neural Networks (CNN) to handle. With the advance of deep learning, several neural networks claim to have solved the point cloud semantic segmentation problem. This paper evaluates three different neural networks for semantic segmentation of point clouds, namely PointNet++, PointCNN and DGCNN. A public indoor scene of the Amersfoort railway station is used as the study area. Unlike the typical indoor scenes and even more from the ubiquitous outdoor ones in currently available datasets, the station consists of objects such as the entrance gates, ticket machines, couches, and garbage cans. For the experiment, we use subsets from the data, remove the noise, evaluate the performance of the selected neural networks. The results indicate an overall accuracy of more than 90% for all the networks but vary in terms of mean class accuracy and mean Intersection over Union (IoU). The misclassification mainly occurs in the classes of couch and garbage can. Several factors that may contribute to the errors are analyzed, such as the quality of the data and the proportion of the number of points per class. The adaptability of the networks is also heavily dependent on the training location: the overall characteristics of the train station make a trained network for one location less suitable for another.

@en

In guiding the energy transition efforts towards renewable energy sources, 3D city models were shown to be useful tools when assessing the annual solar energy generation potential of urban landscapes. However, the simplified roof geometry included in these 3D city models and the lack of additional semantic information about the buildings' roof often yield less accurate solar potential evaluations than desirable. In this paper we propose three different methods to infer and store additional information into 3D city models, namely on physical obstacles present on the roof and existing solar panels. Both can be used to increase the accuracy of roof solar panel retrofit potential. These methods are developed and tested on the open datasets available in the Netherlands, specifically AHN3 lidar point-cloud and PDOK aerial photography. However, we believe they can be adapted to different environments as well, based on the available datasets and their precision locally available.

@en

Indoor localisation methods are an essential part for the management of COVID-19 restrictions, social distancing, and the flow of people in the indoor environment. Moving towards an open work space in this scenario requires effective real-time localisation services and tools, along with a comprehensive understanding of the 3D indoor space. This project’s main objective is to analyse how ArcGIS Indoors can be used with location awareness methods to elaborate and develop space management tools for COVID-19 restrictions in order to reopen the workspace for TU Delft Campus. This was accomplished by using six Arduino micro controllers, which were programmed in C++ to scan all available Wi-Fi fingerprints in the east wing of the Faculty of Architecture and the Built Environment of TU Delft and send over the data to an ArcGIS Indoor Information Model (AIIM). The data stored on the AIIM is then accessed using the app on the user’s Android device using REST Application Programming Interface (API) where a kNN based matching algorithm then identifies the location of the user. The results show that the localisation is not consistent for rooms that are directly above each other or share common access points. However, when functioning to locate different tables inside a room, the system proved to uniquely distinguish between the specific tables. As a result, we can conclude that based on the size of the rooms, more Arduino devices should be installed to achieve an ideal accuracy. Finally, recommendations are made for the continuation of this research.@en

Sustainable development can only be achieved with an innovative improvement from the way we currently analyze, design, build and manage our urban spaces. Current digital analysis and design methods for cities, such as visibility analysis, deeply rely on mapping and modeling techniques. However, most methods fall short of depicting the real visual landscape in the urban realm and this could bring a significant error in visibility calculations which may lead to an improper decision for urban spaces. The technical development of light detection and ranging(LiDAR) technology introduces new approaches for urban study. LiDAR utilizes point clouds including thousands or even millions of georeferenced points, and thus can support 3-D digital representation of urban landscape with detailed information and high resolution. Besides the superiority in representing urban landscape, LiDAR point clouds also has a clear advantage in quantitative analysis and provides better visibility than traditional models. In this paper, we first introduced a novel approach to map visibility in the urban built environment involving vegetation data directly using airborne LiDAR point clouds. This approach calculates neighborhood statistics for occlusion detection. Then we presented 2 case with different scenarios showing how our approach can be used to obtain a precise visibility in an urban area in the Netherlands. At last, we discussed how point clouds based visibility models can be further explored and can better assist urban design.@en

Because unknown interior layouts can have serious consequences in time-sensitive situations, crisis response teams request many potential solutions for visualizing indoor environments in crisis scenarios. This research uses a game engine to directly visualize point cloud data input of indoor environments for generating clear interaction between the environment and viewers, to aid decision-making in high-stress moments. The prospective final product is an integration of game-oriented visualization and cartography, hosted within Unreal Engine 4 (UE4), allowing users to navigate throughout an indoor environment, and customizing certain interaction features. The UE4 project consists of 4 modules: data preprocessing, render style, functional module, and user interface. Finally, this research uses a single-floor indoor point cloud dataset collected from a building in Rotterdam, the Netherlands for the implementation.@en

Emergency operations are a key example for the need of digital twins in the way it is complex, urgent and uncertain. First, the process is complex, as many organizations are involved. Second, it is urgent, as most damage is done in the first moments of an emergency. Third, it is uncertain, as situational conditions tend to change quickly. For outdoor operations, spatial information systems help in creating an overview of the situation, for example by displaying positions of first responder units involved with the incident. However, spatial data of indoor environments is scarce. Static information of the building, such as floor plans, are often outdated or non-existent. Dynamic operational data such as positions of first responders within the building are only available in a very limited way as well, and often without visual representation. To create situation awareness of indoor first responder operation environments, this paper successfully proposes a proof of concept with two objectives. First, the proof of concept will collect spatial environment data in the form of mapping and tracking data by using a Microsoft HoloLens. This means the geometry of the building will be collected, together with traversed routes within the building. Second, the data will be streamed and displayed to a remote first responder coordinator in real-time to create a common operational picture. This enables the coordinator to quickly build situation awareness of the operation environment, enabling the coordinator to improve the quality of decisions, thereby improving first responder performance. The proof of concept showed that situation awareness on all three levels increases with the real-time (live) availability (visualisations) of 3D indoor environments. This concept needs to be tested further on usability and performance.

@en

Occlusions accompany serious problems that reduce the applicability of numerous algorithms. The aim of this work is to detect and characterize urban ground gaps based on occluding object. The point clouds for input have been acquired with Mobile Laser Scanning and have been previously segmented into ground, buildings and objects, which have been classified. The method generates various raster images according to segmented point cloud elements, and detects gaps within the ground based on their connectivity and the application of the hit-or-miss transform. The method has been tested in four real case studies in the cities of Vigo and Paris, and an accuracy of 99.6% has been obtained in occlusion detection and labelling. Cars caused 80.6% of the occlusions. Each car occluded an average ground area of 11.9 m2. The proposed method facilitates knowing the percentage of occluded ground, and if this would be reduced in successive multi-temporal acquisitions based on mobility characteristics of each object class.

@en

Space Filling Curve (SFC) mapping-based clustering and indexing works effectively for point clouds management and querying. It maps both points and queries into a one-dimensional SFC space so that B+- tree could be utilized. Based on the basic structure, this paper develops a generic HistSFC approach which utilizes a histogram tree recording point distribution for efficient querying. The goal is to resolve the issue of skewed data querying. Besides, the paper proposes an agile method to compute a continuous Level of Detail (cLoD), and integrates it into HistSFC to support smooth rendering of massive points. Results indicate that for range queries, HistSFC decreases the False Positive Rate (FPR) of selection by maximally 80%, compared to previous approaches. It also performs significantly faster than the state-of- the-art Oracle SDO_PC solution. With improved performance on visualization and k Nearest Neighbour (kNN) search, HistSFC can therefore be used as a new standard solution. @en

Indoor furniture is of great relevance to building occupants in everyday life. Furniture occupies space in the building, gives comfort, establishes order in rooms and locates services and activities. Furniture is not always static; the rooms can be reorganized according to the needs. Keeping the building models up to date with the current furniture is key to work with indoor environments. Laser scanning technology can acquire indoor environments in a fast and precise way, and recent artificial intelligence techniques can classify correctly the objects that contain. The objective of this work is to study how to minimize the use of point cloud samples in Neural Network training, tedious to label, and replace them with images obtained from online sources. For this, point clouds are converted to images by means of rotations and projections. The conversion of a 3D vector data to a 2D raster allows the use of Convolutional Neural Networks, the achievement of several images for each acquired point cloud object and the combination with images obtained from online sources, such as Google Images. The images have been distributed among the validation and testing training sets following different percentages. The results show that, although point cloud images cannot be completely dispensed within the training set, only 10% of these achieve high accuracy in the classification.

@en

Dramatically increasing collection of point clouds raises an essential demand for highly efficient data management. It can also facilitate modern applications such as robotics and virtual reality. Extensive studies have been performed on point data management and querying, but most of them concentrate on low dimensional spaces. High dimensional data management solutions from computer science have not considered the special features of spatial data; so, they may not be optimal. A Space Filling Curve (SFC) based approach, PlainSFC which is capable of nD point querying has been proposed and tested in low dimensional spaces. However, its efficiency in nD space is still unknown. Besides that, PlainSFC performs poorly on skewed data querying. This paper develops HistSFC which utilizes point distribution information to improve the querying efficiency on skewed data. Then, the paper presents statistical analysis of how PlainSFC and HistSFC perform when dimensionality increases. By experimenting on simulated nD data and real data, we confirmed the patterns deduced: for inhomogeneous data querying, the false positive rate (FPR) of PlainSFC increases drastically as dimensionality goes up. HistSFC alleviates such deterioration to a large extent. Despite performance degeneration in ultra high dimensional spaces, HistSFC can be applied with high efficiency for most spatial applications. The generic theoretical framework developed also allows us to study related topics such as visualization and data transmission in the future.

@en

The users' movements in the indoor environments differ based on the condition of the environments. During an indoor emergency, an efficient evacuation is required to help the users to move to the safe areas. Many types of incidents could impact the movements of users and this requires studying the behavior of the people during the evacuation. The reaction of the users to the incidents could affect the evacuation procedures and that could lead to several types of injuries or death. Each user understands and perceives the indoor environment differently and this plays a critical role in the evacuation. Furthermore, the users of the indoor environments have different rights to access the indoor spaces, which affects the movements of the users during an incident. This paper aims to support the evacuation of a building (educational building) in a crisis by using the integrated model of LADM-IndoorGML and the representation of the 3D model of the building. This research is presenting the initial assessment based on real world application. To reflect evacuation cases, we extended the conceptual model of LADM-IndoorGML to define the access rights for users of indoor environments during crisis. An evacuation exercise has been held at the Faculty of Applied Science at TU Delft to study the access rights during an incident. During the evacuation, Wi-Fi data has been collected for the users of the building for further analysis. A 3D model has been built for the Faculty of Applied Science to analyze the movement of the users. The collected data of the Wi-Fi access points have been structured and imported into the freeware database PostgreSQL/PostGIS. Furthermore, the geometry of 3D model was used to visualize the users’ movements as individuals and groups of users according to their connection to Wi-Fi access. Appropriate visualization has been created using QGIS. This paper demonstrates the entire process of analysis and visualization of users’ movements based on the Wi-Fi logs by using the extended LADM-IndoorGML. The outcome of the research has showed that the results for individual users and group users attached to the same access point differs. The study has also exhibited the importance of the time resolution on Monitoring the movements of a single user or group of users. The completed study clearly demonstrates that with the proposed extension, the integrated LADM-IndoorGML model is able to support the decision-making process during an incident in educational building.

@en

With the rapid growth in point cloud acquisition technologies the recent years we have the ability to measure large quantities of 3D points of significantly detailed and geometrically composite scenes such as urban environments. This advantage can be exploited and used for direct analysis on point clouds. A direct point cloud analysis has several advantages over for example 3D surface reconstruction, such as the end result having more details and the computation being less expensive. In order to make a point cloud representation a suitable alternative for other types of 3D city models, they need to be semantically enriched, resulting in a rich point cloud. One element of this enrichment is the detection of objects, such as windows. Extracting these from facades is specifically what this research revolves around, which can be done by taking advantage of the fact that they show up as holes, since lasers of the point cloud scanner do not properly reflect on them. Two different general approaches are taken to detect windows in a by mobile laser scanner obtained point cloud of Noordereiland, Rotterdam, The Netherlands.