Scanning electron microscopy (SEM) is one of the most common inspection methods in the semiconductor industry and in research labs. To extract the height of structures using SEM images, various techniques have been used, such as tilting a sample, or modifying the SEM tool with extra sources and/or detectors. However, none of these techniques focused on extraction of height information directly from top-down images. In this work, using Monte Carlo simulations, we studied the relation between step height and the emission of secondary electrons (SEs) resulting from exposure with primary electrons at different energies. It is found that part of the SE signal, when scanning over a step edge, is determined by the step height rather than the geometry of the step edge. We present a way to quantify this, arriving at a method to determine the height of structures from top-down SEM images. The method is demonstrated on three different samples using two different SEM tools, and atomic force microscopy is used to measure the step height of the samples. The results obtained are in qualitative agreement with the results from the Monte Carlo simulations.

@en

In this paper key challenges posed on metrology by feature dimensions of 20nm and below are discussed. In detail, the need for software-based tools for SEM image acquisition and image analysis in environments where CD-SEMs are not available and/or not flexible enough to cover all inspection tasks is outlined. These environments include research at universities as well as industrial R and D environments focused on non-IC applications. The benefits of combining automated image acquisition and analysis with computational techniques to simulate image generation in a conventional analytical SEM with respect to the overall reliability, precision and speed of inspection will be demonstrated using real-life inspection tasks as demonstrators.@en