METIS, a mid-infrared imager and spectrograph for the wavelength range 2.9-19μm (astronomical L-, M-, N- and Q-band), will be one of the first three science instruments at the European Extremely Large Telescope (E-ELT). It will provide diffraction limited imaging, coronagraphy, high resolution integral field spectroscopy and low and medium resolution slit spectroscopy. Within the international METIS consortium, the 1st Institute of Physics of the University of Cologne in Germany is responsible for the design, manufacturing, integration and qualification of the Warm Calibration Unit (WCU) of the instrument. The WCU will be a self-contained unit operating at ambient temperature outside of the voluminous METIS dewar, feeding a variety of optical calibration and alignment signals into the optical path of METIS. The functionalities of the WCU will be used for routine daily daytime calibrations after astronomical observing nights and verification of the internal alignment of METIS during assembly, integration and verification (AIV). In this contribution we present the preliminary optical design and principle of operation of the WCU in its current state of the preliminary design phase of METIS.@en

We present the preliminary design of the calibration unit of the future E-ELT instrument METIS. This independent subunit is mounted externally to the main cryostat of METIS and will function both as calibration reference for science observations, as well as verification and alignment tool during the AIT phase. In this paper, we focus on describing its preliminary layout and foreseen functionalities, based on the performance requirements defined at system level and the constraints imposed by warm IR background. We discuss the advantage of employing an integrating sphere as common radiation emitter, leading to a novel and versatile design, where the source's spatio-spectral properties can be varied with high fidelity and repeatability. By combining only few tuneable sources and mechanisms we show how a large instrument such as METIS can be calibrated and tested, without the need of a complex cold calibration unit.@en