Our understanding of the behavior of the geomagnetic field arises from magnetic signals stored in geological materials, e.g. lavas. Almost all experiments to determine the past state of the Earth’s magnetic field use bulk samples (typically 1 - 10 cc) and measure their magnetic moment after series of laboratory treatments. Lavas, however, consist of mixtures of different iron-oxide grains that vary in size, shape, and chemistry. Some of these grains are good recorders of the Earth’s magnetic field; others are not. Only a small amount of adverse behaved magnetic grains in a sample already hampers all classical experiments to obtain paleointensities; success rates as low as 10-20% are common, i.e. for 80-90% of all lavas vital information on paleointensities is lost before it can be uncovered. Recently, we showed that it is possible to determine the magnetization of individual grains inside a synthetic sample using a new technique: Micromagnetic Tomography. The individual magnetizations of grains are determined by inverting scanning magnetometry data from the surface on the sample onto the known locations, sizes and shapes of the magnetic grains that are obtained from a microCT scan of the sample. The synthetic sample used for our proof-of-concept, however, was optimized for success: the dispersion of magnetic markers was low, and the magnetite grains had a well-defined grain size range. Furthermore, the scanning SQUID microscope used requires the sample to be at 4 K, below the Verweij transition of the magnetite grains. Here we present the first Micromagnetic Tomography results from natural samples. We used two magnetic scanning techniques that operate at room temperature, a Magnetic Tunneling Junction set-up and a Quantum Diamond Magnetometer, to acquire the magnetic surface scans from a Hawaiian lava and calculated magnetic moments of individual grains present. We show that it is possible to acquire rock magnetic information as function of grain size from these natural samples and reveal the first results of interpreting a paleomagnetic direction from selected subsets of grains in our samples. These are the first steps towards deriving rock magnetic and paleomagnetic information from subsets of known good recorders inside lava samples, a technique that will revolutionize our field of research.@en

Obtaining reliable information from even the most challenging paleomagnetic recorders, such as the oldest igneous rocks and meteorites, is paramount to open new windows into Earth's history. Currently, such information is acquired by simultaneously sensing millions of particles in small samples or single crystals using superconducting quantum interference device magnetometers. The obtained rock-magnetic signal is a statistical ensemble of grains potentially differing in reliability as paleomagnetic recorder due to variations in physical dimensions, chemistry, and magnetic behavior. Here we go beyond bulk magnetic measurements and combine computed tomography and scanning magnetometry to uniquely invert for the magnetic moments of individual grains. This enables us to select and consider contributions of subsets of grains as a function of particle-specific selection criteria and avoid contributions that arise from particles that are altered or contain unreliable magnetic carriers. This new, nondestructive, method unlocks information from complex paleomagnetic recorders that until now goes obscured.

@en