J

J Belis

26 records found

Authored

Reinforced glass beams composed of annealed, heat-strengthened and fully tempered glass
Conference paper (2012) - P.C. Louter, J Belis, F Bos, F.A. Veer

Influence of the load history on the edge strength of glass with cut edge finishing
Conference paper (2012) - Marc Vandebroek, J Belis, P.C. Louter

The edge strength of glass is affected by the load history: i.e. the load duration and the loading type, e.g. constant loading, cyclic loading or linearly increasing loading. In standards, these influences are expressed by the factor kmod, which reduces the strength ...

Experimental validation of edge strength model for glass with polished and cut edge finishing

In literature, the experimental validation of a glass edge strength model is lacking. Therefore, in this study, an edge strength model was established and validated. The short-term parameters of the edge strength model, i.e. the flaw geometry and depth, were determined by mean ...

Scaling up SentryGlas-laminated reinforced glass beams
Conference paper (2010) - P.C. Louter, J Belis, F.A. Veer

Stiffness of Laminated glass - influence of different loading conditions
Conference paper (2009) - D Callewaert, D Delincé, J Belis, R Impe

Laminating metal-to-glass: preliminary results of case-study
Conference paper (2009) - J Belis, K de Visscher, D Callewaert, R Impe

Redundancy of reinforced glass beams : temperature, moisture and time dependent behaviour of the adhesive bond
Conference paper (2008) - P.C. Louter, F.A. Veer, J Belis

Temperature-dependent behaviour of glass/ionomer laminates : preliminary test results
Conference paper (2008) - D Callewaert, D Delincé, J Belis, R Impe

Influence of temperfature and load duration on glass/ionomer laminates otrsion and bending stiffness
Conference paper (2008) - D Callewaert, J Belis, J Depaepe, D Delincé, K DeVogel, R Impe

Reinforced glass beams : effect of increased temperatures on the glass-to-reinforcement adhesive bond
Conference paper (2008) - P.C. Louter, D Callewaert, F.A. Veer, J Belis, FP Bos

Experimental investigation of the local bridging behaviour of the interlayer in broken laminated glass
Conference paper (2008) - D Delincé, D Callewaert, D. Sonck, R Impe, J Belis

Post-breakage behaviour of laminated glass in structural applications
Conference paper (2008) - D Delincé, D Callewaert, J Belis, R Impe

Stacking glass elements, building a glass tower

Stacking glass elements, how to build a glass tower

Cold bending of laminated glass panels
Journal article (2007) - J Belis, B Inghelbrecht, J van Impe, D Callewaert

The effect of post-tensioning on the buckling behaviour of a glass T-beam
Conference paper (2006) - P.C. Louter, J Belis, R Impe, D Callewaert, K Verfaille

The joint for the all transparent pavilion
Conference paper (2005) - FP Bos, F.A. Veer, J Belis, EJ van Nieuwenhuijzen, P.C. Louter

Reinforced glass cantilever beams
Conference paper (2005) - P.C. Louter, J Belis, F.A. Veer, G.J. Hobbelman

Designing and planning the world's biggest experimental glass structure

Design and testing of glass purlins for a 100 m2 transparent pavilion
Conference paper (2005) - J Belis, R Impe, P.C. Louter, F.A. Veer, FP Bos