While measured streamflow is commonly used for hydrological model evaluation and calibration, an increasing amount of data on additional hydrological variables is available. These data have the potential to improve process consistency in hydrological modeling and consequently for predictions under change, as well as in data-scarce or ungauged regions. Here, we show how these hydrological data beyond streamflow are currently used for model evaluation and calibration. We consider storage and flux variables, namely snow, soil moisture, groundwater level, terrestrial water storage, evapotranspiration, and altimetric water level. We aim at summarizing the state-of-the-art and providing guidance for the use of additional hydrological variables for model evaluation and calibration. Based on a review of the current literature, we summarize observation methods and uncertainties of currently available data sets, challenges regarding their implementation, and benefits for model consistency. The focus is on catchment modeling studies with study areas ranging from a few km² to ~500,000 km². We discuss challenges for implementing alternative variables that are related to differences in the spatio-temporal resolution of observations and models, as well as to variable-specific features, for example, discrepancy between observed and simulated variables. We further discuss advancements required to deal with uncertainties of the hydrological data and to integrate multiple, potentially inconsistent datasets. The increased model consistency and improvement shown by most reviewed studies regarding the additional variables often come at the cost of a slight decrease in streamflow model performance.

@en

Nature-based solutions for water-resource challenges require advances in the science of ecohydrology. Current understanding is limited by a shortage of observations and theories that can further our capability to synthesize complex processes across scales ranging from submillimetres to tens of kilometres. Recent developments in environmental sensing, data, and modelling have the potential to drive rapid improvements in ecohydrological understanding. After briefly reviewing advances in sensor technologies, this paper highlights how improved measurements and modelling can be applied to enhance understanding of the following ecohydrological examples: interception and canopy processes, root uptake and critical zone processes, and up-scaled effects of land use on streamflow. Novel and improved sensors will enable new questions and experiments, while machine learning and empirical methods provide additional opportunities to advance science. The synergy resulting from the convergence of these parallel developments will provide new insight into ecohydrological processes and thereby help identify nature-based solutions to address water-resource challenges in the 21st century.

@en

Reading landscapes and developing calibration-free runoff generation models that adequately reflect land surface heterogeneities remains the focus of much hydrological research. In this study, we report a novel and simple topography-driven runoff generation parameterization – the HAND-based Storage Capacity curve (HSC), which uses a topographic index (HAND, Height Above the Nearest Drainage) to identify hydrological similarity and the extent of saturated areas in catchments. The HSC can be used as a module in any conceptual rainfall–runoff model. Further, coupling the HSC parameterization with the mass curve technique (MCT) to estimate root zone storage capacity (SuMax), we developed a calibration-free runoff generation module, HSC-MCT. The runoff generation modules of HBV and TOPMODEL were used for comparison purposes. The performance of these two modules (HSC and HSC-MCT) was first checked against the data-rich Bruntland Burn (BB) catchment in Scotland, which has a long time series of field-mapped saturation area extent. We found that HSC, HBV and TOPMODEL all perform well to reproduce the hydrograph, but the HSC module performs better in reproducing saturated area variation, in terms of correlation coefficient and spatial pattern. The HSC and HSC-MCT modules were subsequently tested for 323 MOPEX catchments in the US, with diverse climate, soil, vegetation and geological characteristics. In comparison with HBV and TOPMODEL, the HSC performs better in both calibration and validation, particularly in the catchments with gentle topography, less forest cover, and arid climate. Despite having no calibrated parameters, the HSC-MCT module performed comparably well with calibrated modules, highlighting the robustness of the HSC parameterization to describe the spatial distribution of the root zone storage capacity and the efficiency of the MCT method to estimate SuMax. This novel and calibration-free runoff generation module helps to improve the prediction in ungauged basins and has great potential to be generalized at the global scale.@en