In this study, we focused on the 3D dispersion of colloids. To our knowledge, we were the first to do so. Thereto, we injected silica encapsulated DNA tagged superparamagnetic particles (SiDNAmag) in a homogeneous coarse grain sand tank. At four downstream locations, SiDNAmag concentrations were determined as a function of time. Longitudinal and transverse dispersivity values and associated uncertainties of SiDNAmag were determined using Monte Carlo modelling approach. The parameter associated uncertainties of hydraulic conductivity as well as of the effective porosity estimated from SiDNAmag breakthrough curves were statistically similar to those estimated from salt tracer breakthrough curves. Further, the SiDNAmag dispersivity uncertainty ranges were then statistically compared with the salt tracer (NaCl, and fluorescein) dispersivities. Our results indicated that time to rise, time of peak concentration and shape of the breakthrough curves of SiDNAmag were similar to those of the salt tracer breakthrough curves. Despite the size difference between the salt tracer molecules and SiDNAmag, size exclusion did not occur, probably due to the large pore throat diameter to SiDNAmag diameter ratio. The median longitudinal dispersivity (α_L) of salt tracer and SiDNAmag were 4.9 and 5.8 × 10⁻⁴ m, respectively. The median ratio of horizontal and vertical transverse dispersivities to α_L, (α_TH /α_L and α_TV /α_L, respectively), for salt tracer and SiDNAmag ranged between 0.52 and 0.56. Through the statistical tests, we concluded that the longitudinal and traverse dispersivities of SiDNAmag were not statistically significantly different from salt tracer in 3 dimensions and could be used to characterize the dispersive properties of the medium we used. Our work contributes to a better understanding of 3D dispersion of SiDNAmag in saturated porous media.

We investigated the applicability of Silica encapsulated, superparamagnetic DNA particles (SiDNAmag) in determining aquifer hydraulic parameters at different ionic strengths (1 mM, 5 mM, and 20 mM phosphate buffer) of injection suspension. Thereto, in a homogeneous, unconsolidated sand tank we pulse - injected two uniquely sequenced SiDNAmag at two injection points. At 0.5 m and 0.8 m downstream from the injection points, we measured the concentration of SiDNAmags at three vertically distributed and two horizontally distributed sampling locations. We estimated the hydraulic parameter distributions from the SiDNAmag breakthrough curves through a Monte – Carlo approach and compared the parameter distributions with salt tracer breakthrough curves. Our results indicated that at all the ionic strengths, the times of peak concentrations, and the shapes of the breakthrough curves were similar to the salt tracer. As compared to the salt, a 1 – 3 log units reduction in the maximum effluent concentration of SiDNAmag was due to kinetic attachment. The attachment rate reduced from 1 mM to 5 mM phosphate buffer possibly due to competitive adsorption of phosphate onto the favourable attachment sites. SiDNAmag attachment rate further increased in 20 mM buffer suspension, possibly due to the compression of electric double layer and reduction in energy barrier for attachment. The parameter distributions of hydraulic conductivity (k), effective porosity (n_e), longitudinal dispersivity (α_L), vertical transverse dispersivity (α_TV /α_L) and horizontal transverse dispersivity (α_TH /α_L) estimated from the SiDNAmag and the salt tracer breakthrough curves were statistically similar. Our work contributes to the applicability of colloidal SiDNAmags for determining hydraulic parameters at different ionic strength conditions.