The bending moment response of straight pile foundations, as the dominant factor of spudcan-pile interaction, has received focused attention in the close joint operation between jacket platforms and jack-up drilling rigs. As the foundation for the same widely used in jacket platforms, the research on the batter pile is still a knowledge gap in this field. This paper presents a numerical study of the bending moment response of batter piles at different inclination angles and azimuthal angles during spudcan installation. Using a coupled Eulerian-Lagrangian finite element method, the effects of flexural rigidity, stiffness ratio, spudcan-pile clearance distance, and pile length on the pile head bending moment were sequentially evaluated. It was found that the pile bending moment response is related to the change in soil flow mechanism caused by spudcan penetration and becomes more significant with the increase of inclination angle; under the same inclination angle, the bending moment response is the most dangerous when the azimuthal angle is 0°. Based on the parameter study, a simple method is proposed to estimate the pile head bending moment during spudcan installation. The outcome may facilitate incorporating pile spatial inclination into spudcan-pile interaction research and contribute to related safety design.@en

Current design practice of spudcans in clay generally ignores the influence of installation and subsequent operation on the spudcan elastic stiffness. In reality, soil consolidation around the post-installation spudcan can cause the elastic stiffness to evolve with time, thus affecting the safe and stable operation of jack-up platforms. This paper reports a numerical study dedicated to this specific subject. The spudcan installation and the time evolution of elastic stiffness coefficients during operation are continuously simulated using an effective stress large deformation finite element technique. The effects of soil, loading, embedment and geometric conditions were evaluated and interpreted. It was found that the non-uniform growth of the shear modulus caused by soil consolidation during operation results in the time evolution of the elastic stiffness and makes the deformation mechanism asymmetric. The overlap degree between the involved zone of the deformation mechanism and the growth zone of the shear modulus (or the so-called averaging effect) affects the gradient of time evolution. Based on the parametric study, a generalized framework is present for predicting the elastic stiffness coefficients of spudcans for different scenarios and consolidation times, thus providing a complete view of the time evolution of elastic stiffness for the offshore in-site assessment.@en