Lessons from recent earthquakes have provided a tough reality check of the traditional seismic design approach and technologies, highlighting the urgent need for a paradigm shift of performance-based design criteria and objectives toward low-damage design philosophy and technologies for the whole building system. Modern society is asking for “earthquake proof” resilient buildings that are able to withstand seismic events without compromising their functionality. The EU-funded SERA (Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe Project) project discussed in this paper provided the opportunity to develop and validate within the European context an integrated seismic low-damage prototype, including main structure and non-structural elements, for the next generation of high-performance buildings. This paper presents an overview of the research, involving three-dimensional shake table tests of a two-storey 1:2 scaled timber-concrete post-tensioned dissipative low-damage structure “dressed” by earthquake-resistant gypsum/masonry partitions and glass/concrete facades. Specimen details, construction and assembly phases, test setup, and experimental results are discussed. After many cycles of input motions at increasing levels of seismic intensity (higher than Collapse Prevention Limit State), the integrated building system exhibited a very high seismic performance. The experimental campaign carried out at the National Laboratory of Civil Engineering in Lisbon confirmed the unique potential of low-damage technologies and the opportunity for their widespread implementation into design practice.@en

Post-earthquake damage reports have continuously highlighted the significant vulnerability of nonstructural elements to seismic events. Nonstructural damage has severe impact in the building recovery, increasing the socioeconomic losses even for low intensity events. In the last few years, research efforts have focused on the development of innovative nonstructural solutions, to be combined with damage-resistant structural skeletons in order to obtain an overall high-performance building. As part of a European Union (EU)-funded project, the effectiveness of such integrated skeleton&envelope low-damage system in reducing the earthquake related losses was investigated. Tridimensional shake table tests on a 1:2 scaled timber-concrete low-damage structural skeleton, “dressed” by different innovative nonstructural elements (glass/concrete facades, gypsum/masonry partitions), were performed at the National Laboratory for Civil Engineering (LNEC) in Lisbon, Portugal. The shake table tests were carried out at increasing seismic intensities to investigate the structural and nonstructural performance up to a higher-than Collapse Prevention Limit State according to the Italian Code (975 years return period). This paper focuses on the dynamic behavior of nonstructural elements with detailed discussion on construction detailing, seismic demand and performance of the innovative solutions. The high performance of nonstructural elements proved the potential of the details introduced in the partitions/facades. Minimal or no damage was observed up to the end of the overall testing sequence, which reached moderate-to-high interstory drift ratios (more than 1.00%) - typically expected to cause severe damage to traditional nonstructural partitions/infills/facades.@en