The highly efficient and stable electrolysis needs the rational control of the catalytically active interface during the reactions. Here we report a new operando surface restructuring pathway activated by pairing catalyst and electrolyte ions. Using SrCoO_3-δ-based perovskites as model catalysts, we unveil the critical role of matching the catalyst properties with the electrolyte conditions in modulating catalyst ion leaching and steering surface restructuring processes toward efficient oxygen evolution reaction catalysis in both pH-neutral and alkaline electrolytes. Our results regarding multiple perovskites show that the catalyst ion leaching is controlled by catalyst ion solubility and anions of the electrolyte. Only when the electrolyte cations are smaller than catalyst's leaching cations, the formation of an outer amorphous shell can be triggered via backfilling electrolyte cations into the cationic vacancy at the catalyst surface under electrochemical polarization. Consequently, the current density of reconstructed SrCoO_3-δ is increased by 21 folds compared to the pristine SrCoO_3-δ at 1.75 V vs reversible hydrogen electrode and outperforms the benchmark IrO₂ by 2.1 folds and most state-of-the-art electrocatalysts in the pH-neutral electrolyte. Our work could be a starting point to rationally control the electrocatalyst surface restructuring via matching the compositional chemistry of the catalyst with the electrolyte properties.

Regulating the rational wettability on gas-diffusion electrodes (GDEs) plays a pivotal role to improve the efficiency of CO₂RR via fine-tuning the reaction zone and boosting the formation of triple-phase interfaces. Herein, we present a wettability regulation strategy that modulates the triple-phase reaction zone in the catalyst layer of GDEs. This strategy was employed on a flow-through hollow fiber GDE coated with a Bi-embedded catalyst layer. Compared to other ex-situ methods (e.g., adding wetting agents) affecting the bulk of electrocatalysts or catalyst layer, we create distinctive hydrophilic-hydrophobic regions within the catalyst layer. Catalyst layer with hydrophilic-hydrophobic regions outperforms the fully hydrophilic one by facilitating the species transport, boosting triple-phase interface formation, and maximizing the active sites. This regulation strategy showed stable wettability during CO₂RR cathodic conditions, evidenced by the direct measurement of penetration depth. The electrode with the regulated wettability exhibited over 80% catalyst utilization and 4 times higher formate partial current density (~150 mA cm⁻² with FE_formate> 90%) compared to the untreated electrode, outperforming other GDEs employed for CO₂RR to formate in the same concentrations of bicarbonate. The finding of this versatile microenvironment regulation strategy can be extended to GDEs used for other gas-phase reactions.

Electrochemical conversion of gaseous CO₂ to value-added products and fuels is a promising approach to achieve net-zero CO₂ emission energy systems. Significant efforts have been achieved in the design and synthesis of highly active and selective electrocatalysts for this reaction and their reaction mechanism. To perform an efficient conversion and desired product selectivity in practical applications, we need an active, cost-effective, stable, and scalable electrolyzer design. Membrane-electrode assemblies (MEAs) can be an efficient solution to address the key challenges in the aqueous gas diffusion electrodes (GDE), e.g., ohmic resistances and complex reactor design. This review presents a critical overview of recent advances in experimental design and simulation of MEAs for CO₂ reduction reaction, including the shortcomings and remedial strategies. In the last section, the remaining challenges and future research opportunities are suggested to support the advancement of CO₂ electrochemical technologies.