Natural fracture network characteristics can be establishes from high-resolution outcrop images acquired from drone and photogrammetry. Such images might also be good analogues of subsurface naturally fractured reservoirs and can be used to make predictions of the fracture geometry and efficiency at depth. However, even when supplementing fractured reservoir models with outcrop data, gaps will remain in the model and fracture network extrapolation methods are required. In this paper we used fracture networks interpreted from two outcrops from the Apodi area, Brazil, to present a revised and innovative method of fracture network geometry prediction using the multiple-point statistics (MPS) method.

The MPS method presented in this article uses a series of small synthetic training images (TIs) representing the geological variability of fracture parameters observed locally in the field. The TIs contain the statistical characteristics of the network (i.e. orientation, spacing, length/height and topology) and allow for the representation of a complex arrangement of fracture networks. These images are flexible, as they can be simply sketched by the user.

We proposed to simultaneously use a set of training images in specific elementary zones of the Apodi outcrops in order to best replicate the non-stationarity of the reference network. A sensitivity analysis was conducted to emphasise the influence of the conditioning data, the simulation parameters and the training images used. Fracture density computations were performed on selected realisations and compared to the reference outcrop fracture interpretation to qualitatively evaluate the accuracy of our simulations. The method proposed here is adaptable in terms of training images and probability maps to ensure that the geological complexity in the simulation process is accounted for. It can be used on any type of rock containing natural fractures in any kind of tectonic context. This workflow can also be applied to the subsurface to predict the fracture arrangement and fluid flow efficiency in water, geothermal or hydrocarbon fractured reservoirs.@en

Natural fractures conduct fluids in subsurface reservoirs. Quick and realistic predictions of the fracture network organization and its fluid flow efficiency from limited amount of data is critical to optimize resources productivity. We recently developed a method based on multiple point statistics (MPS) technique to produce geologically-constrained fracture network simulations. The method allows to account for the intrinsic non-stationarity of these networks by considering a multivariate input data instead of averaged distribution of fracture parameters. In addition, the method considers probability maps reflecting the influence of fracture drivers in the network variability. Consequently, the simulated fracture networks derived from the innovative MPS approach are geologically better constrained than in classical discrete fracture network modelling approaches. This paper proposes to apply this method in subsurface conditions where available data are sparsely distributed. We developed a workflow where data are gathered from wellbore and from additional sources (outcrops). These data are used to extrapolate a network around the borehole as training images and themselves are extrapolated at the reservoir scale following a geological probability map.This work also presents innovations on the way how training images and probability maps that may integrate more geology constrain than relying almost entirely on available data.@en