The increasing complexity of next-generation mechatronic systems leads to different types of periodic disturbances, which require dedicated repetitive control strategies to attenuate. The aim of this paper is to develop a new repetitive control strategy to completely attenuate a periodic disturbance and a user-defined number of relevant higher harmonics with limited memory usage. To this end, a multirate repetitive controller is developed, which combines a buffer at a reduced sampling rate with learning and robustness filters at the original sampling rate of the system. This leads to a linear periodic time-varying system, for which convergence conditions are developed. The method is implemented on an industrial print-belt system, demonstrating that it can match the performance of traditional repetitive control while significantly reducing the memory usage.

@en

The performance increase up to the sensor resolution in repetitive control (RC) invalidates the standard assumption in RC that data is available at equidistant time instances, e.g., in systems with package loss or when exploiting timestamped data from optical encoders. The aim of this paper is to develop an intermittent sampling RC framework for non-equidistant measurements. Sufficient stability conditions are derived that can be verified using non-parametric frequency response function data. This results in a frequency domain design procedure to explicitly address uncertainty. The RC framework is validated on an industrial printbelt setup for which exact non-equidistant measurement data is available.@en