The Large Interferometer For Exoplanets (LIFE) is a proposed space mission that enables the spectral characterization of the thermal emission of exoplanets in the solar neighborhood. The mission is designed to search for global atmospheric biosignatures on dozens of temperate terrestrial exoplanets and it will naturally investigate the diversity of other worlds. Here, we review the status of the mission concept, discuss the key mission parameters, and outline the trade-offs related to the mission’s architecture. In preparation for an upcoming concept study, we define a mission baseline based on a free-formation flying constellation of a double Bracewell nulling interferometer that consists of 4 collectors and a central beam-combiner spacecraft. The interferometric baselines are between 10–600 m, and the estimated diameters of the collectors are at least 2 m (but will depend on the total achievable instrument throughput). The spectral required wavelength range is 6–16 μm (with a goal of 4–18.5 μm), hence cryogenic temperatures are needed both for the collectors and the beam combiners. One of the key challenges is the required deep, stable, and broad-band nulling performance while maintaining a high system throughput for the planet signal. Among many ongoing or needed technology development activities, the demonstration of the measurement principle under cryogenic conditions is fundamentally important for LIFE. @en

The Mid-Infrared ELT Imager and Spectrograph (METIS) will be one of only three 1^st-generation science instruments on the 39m Extremely Large Telescope (ELT).METIS will provide diffraction-limited imaging and medium resolution slit-spectroscopy from 3-13 microns (L, M, and N bands), as well as high resolution (R≈100,000) integral field spectroscopy from 2.9-5.3 microns.Both imaging and IFU spectroscopy can be combined with coronagraphic techniques.After the final design reviews of the optics (2021) and the entire system (2022), most hardware procurements have started.In this paper we present an overview of the status of the various ongoing activities.Many hardware components are already in hand, and the manufacturing is in full swing in order to start the assembly and testing of the subsystems in 2024 toward first light at the telescope in 2028/29.This rather brief paper only provides an overview of the project status.For more information, we refer to the detailed instrument paper which will be published soon.

@en

Vortex phase masks have been shown to be an efficient means to reduce the blinding stellar light in high-contrast imaging instruments. Once placed at the focal plane of the telescope, the helical phase ramp of a vortex phase mask diffracts the light of a bright on-axis source outside the re-imaged telescope pupil, while transmitting the light of a faint off-axis companion nearly unaffected. The Annular Groove Phase Mask (AGPM) is a broadband metasurface implementation of a vector vortex phase mask using the artificial birefringence of a circular subwavelength grating etched onto a diamond substrate. To date, the AGPM design has been optimized using rigorous coupled-wave analysis (RCWA), which is a valid tool to simulate periodic straight gratings. However, we have now reached a performance level where the curvature of the grating lines at the center becomes a limiting factor. Here, we use a finite-difference time-domain (FDTD) method to correctly describe the AGPM performance, including the effect of the curved grating close to its center. We confirm the validity of this simulation framework by comparing its predictions with experimental results obtained on our infrared coronagraphic test bench, and we show that RCWA fails at reproducing correctly the central AGPM performance, confirming the need for a full 3d simulation tool such as FDTD. Finally, we use FDTD to optimize the grating parameters at the AGPM center, and conclude with a new optimal design.

@en

The Hi-5 instrument, a proposed high-contrast L' band (3.5-4.0 μm) nulling interferometer for the visitor focus of the Very Large Telescope Interferometer (VLTI), will characterize young extra-solar planetary systems and exozodiacal dust around nearby main-sequence stars. Thanks to VLTI's angular resolution (λ=B = 5 mas for the longest UT baseline), it will fill the gap between young giant exoplanets discovered by ongoing single-aperture direct imaging surveys and exoplanet populations discovered by radial velocity surveys. In this paper, we investigate the exoplanet detection yield of Hi-5. First, we present the latest catalog of stars identified as members of young stellar associations within 150 pc of the Sun thanks to the BANYAN algorithm and other searches for young moving group members. Realistic exoplanet populations are then generated around these stars and processed with the SCIFYsim tool, the end-to-end simulator for the Hi-5 instrument. Then, two formation models are used to estimate the giant planet's luminosity. The first is the New Generation Planetary Population Synthesis (NGPPS), also known as the Bern model, and the second is a statistical model based on gravitational instability (hot-start model - AMES-Dusty model). We show that Hi-5 is insensitive to cold-start planets but can detect giant hot-start planets. With ATs, more than 40 planets could be detected assuming 20 nights of observations. With its unique capabilities, Hi-5 is also able to constrain in mass the observed systems. Hi-5 is sensitive to planets with a mass > 2 Mjup around the snow line.@en

The Mid-infrared ELT Imager and Spectrograph (METIS) will provide the Extremely Large Telescope (ELT) with a unique window to the thermal- and mid-infrared (3–13 µm). Its single-conjugate adaptive optics (SCAO) system will enable high contrast imaging and integral field unit (IFU) spectroscopy (R ~ 100 000) at the diffraction limit of the ELT. This article describes the science drivers, conceptual design, observing modes, and expected performance of METIS.@en

Exoplanet science is one of the most thriving fields of modern astrophysics. A major goal is the atmospheric characterization of dozens of small, terrestrial exoplanets in order to search for signatures in their atmospheres that indicate biological activity, assess their ability to provide conditions for life as we know it, and investigate their expected atmospheric diversity. None of the currently adopted projects or missions, from ground or in space, can address these goals. In this White Paper, submitted to ESA in response to the Voyage 2050 Call, we argue that a large space-based mission designed to detect and investigate thermal emission spectra of terrestrial exoplanets in the mid-infrared wavelength range provides unique scientific potential to address these goals and surpasses the capabilities of other approaches. While NASA might be focusing on large missions that aim to detect terrestrial planets in reflected light, ESA has the opportunity to take leadership and spearhead the development of a large mid-infrared exoplanet mission within the scope of the “Voyage 2050” long-term plan establishing Europe at the forefront of exoplanet science for decades to come. Given the ambitious science goals of such a mission, additional international partners might be interested in participating and contributing to a roadmap that, in the long run, leads to a successful implementation. A new, dedicated development program funded by ESA to help reduce development and implementation cost and further push some of the required key technologies would be a first important step in this direction. Ultimately, a large mid-infrared exoplanet imaging mission will be needed to help answer one of humankind’s most fundamental questions: “How unique is our Earth?”

@en

This article [J. Astron. Telesc. Instrum. Syst. 6(3), 035005 (Sep 24, 2020) DOI: 10.1117/1.JATIS.6.3.035005] as originally published omitted three authors as well as three references. The omitted authors produced the Apodizing Phase Plate design used in the paper’s end-to-end simulations. This contribution was provided by David Doelman, Emiel Por, and Frans Snik, all of Leiden University. They have been added as authors on the paper, as listed above. The following acknowledgment also has been added to the published paper: “The research of DD and FS leading to these results has received funding from the European Research Council under ERC Starting Grant agreement 678194 (FALCONER).” Additionally, three references were omitted from the paper when it was published. They are listed below: 61. G. Otten et al., “Performance characterization of a broadband vector Apodizing Phase Plate coronagraph,” Opt. Express 22(24), 30287 (2014). 62. G. Otten et al., “The vector apodizing phase plate coronagraph: prototyping, characterization and outlook,” Proc. SPIE 9151, 91511R (2014). 63. E. Por, “Optimal design of apodizing phase plate coronagraphs,” Proc. SPIE 10400, 104000V (2017). All versions of the article were corrected on 15 October 2020. The article appears correctly in print.

@en

With the advent of 30- to 40-m class ground-based telescopes in the mid-2020s, direct imaging of exoplanets is bound to take a new major leap. Among the approved projects, the Mid-infrared Extremely Large Telescope (ELT) Imager and Spectrograph (METIS) instrument for the ELT holds a prominent spot; by observing in the mid-infrared regime, it will be perfectly suited to study a variety of exoplanets and protoplanetary disks around nearby stars. Equipped with two of the most advanced coronagraphs, the vortex coronagraph and the apodizing phase plate, METIS will provide high-contrast imaging (HCI) in L-, M- and N-bands, and a combination of high-resolution spectroscopy and HCI in L- and M-bands. We present the expected HCI performance of the METIS instrument, considering realistic adaptive optics residuals, and investigate the effect of the main instrumental errors. The most important sources of degradation are identified and realistic sensitivity limits in terms of planet/star contrast are derived.@en

The Mid-Infrared ELT Imager and Spectrograph (METIS) is one of three first light instruments on the ELT. It will provide high-contrast imaging and medium resolution, slit-spectroscopy from 3 - 19um, as well as high resolution (R ∼ 100,000) integral field spectroscopy from 2.9-5.3μm. All modes observe at the diffraction limit of the ELT, by means of adaptive optics, yielding angular resolutions of a few tens of milliarcseconds. The range of METIS science is broad, from Solar System objects to active galactic nuclei (AGN). We will present an update on the main science drivers for METIS: circum-stellar disks and exoplanets. The METIS project is now in full steam, approaching its preliminary design review (PDR) in 2018. In this paper we will present the current status of its optical, mechanical and thermal design as well as operational aspects. We will also discuss the challenges of building an instrument for the ELT, and the required technologies.

@en

The Mid-infrared E-ELT Imager and Spectrograph (METIS) for the European Extremely Large Telescope (E- ELT) consists of diffraction-limited imagers that cover 3 to 14 microns with medium resolution (R 5000) long slit spectroscopy, and an integral field spectrograph for high spectral resolution spectroscopy (R 100,000) over the L and M bands. We present our approach for high contrast imaging with METIS, covering diffraction suppression with coronagraphs, the removal of residual aberrations using QACITS1, 2 and Phase Sorting Interferometry (PSI),3 and simulations demonstrating the expected contrast.@en