In the coming years numerous existing traffic bridges in cities are subject to re-evaluation. In this paper a new probabilistic traffic load model for short-span bridges is proposed. As an example, site-specific weigh-in-motion data from Rotterdam, the Netherlands, is included in
...
In the coming years numerous existing traffic bridges in cities are subject to re-evaluation. In this paper a new probabilistic traffic load model for short-span bridges is proposed. As an example, site-specific weigh-in-motion data from Rotterdam, the Netherlands, is included in the model. The method proposed in this paper allows for a very efficient computation and at the same time takes into account the stochastics in axle loads and distances. For a simply supported 6 m single lane bridge the probabilistic load model provides a design load effect that is slightly lower than currently prescribed EN 1991-2 and the Dutch Guidelines for existing structures NEN 8700 and NEN 8701. This indicates that there is possible potential for a small reduction of the traffic load for short-span city bridges compared to the current standards. However, given the questionable quality of recorded measurements, a more extensive measurement campaign using WIM measurements is needed to get an adequate quantification of the traffic load parameters for city traffic conditions. @en
