The application of molybdenum oxide (MoOx) as a hole-selective contact for silicon-based solar cells has been explored due to superior optical transmittance and potentially leaner manufacturing compared to fully amorphous silicon-based heterojunction (SHJ) devices. However, the d
...
The application of molybdenum oxide (MoOx) as a hole-selective contact for silicon-based solar cells has been explored due to superior optical transmittance and potentially leaner manufacturing compared to fully amorphous silicon-based heterojunction (SHJ) devices. However, the development of MoOx contacts has been hampered by their poor thermal stability, resulting in a carrier selectivity loss and an S-shaped IV curve. The aim of this study is to understand the influence of different passivating interlayers on the carrier selectivity of hole-selective MoOx contacts for crystalline silicon (c-Si) solar cells. We highlight the effect of different interlayers on the surface passivation quality, contact selectivity, and the thermal stability of our MoOx-contacted devices. The interlayers studied are intrinsic hydrogenated amorphous silicon (a-Si:H(i)), thermally grown ultrathin SiO2, and a stack consisting of an ultrathin SiOy and Al2O3 layer. Additionally, we simulate the interacting interlayer properties on the carrier selectivity of our MoOx contacts using a simplified model. Among these interlayers, the Al2O3/SiOy stack shows to be a promising alternative to SiO2 by enabling efficient transport of holes while being able to sustain an annealing temperature of at least 250 °C underlining its potential in module manufacturing and outdoor operation.@en
