In this paper, an approach for reducing the drift in monocular visual odometry algorithms is proposed based on a feedforward neural network. A visual odometry algorithm computes the incremental motion of the vehicle between the successive camera frames, then integrates these increments to determine the pose of the vehicle. The proposed neural network reduces the errors in the pose estimation of the vehicle which results from the inaccuracies in features detection and matching, camera intrinsic parameters, and so on. These inaccuracies are propagated to the motion estimation of the vehicle causing larger amounts of estimation errors. The drift reducing neural network identifies such errors based on the motion of features in the successive camera frames leading to more accurate incremental motion estimates. The proposed drift reducing neural network is trained and validated using the KITTI dataset and the results show the efficacy of the proposed approach in reducing the errors in the incremental orientation estimation, thus reducing the overall error in the pose estimation.@en

In this paper, a simultaneous localization and mapping algorithm for tracking the motion of a pedestrian with a foot-mounted inertial measurement unit is proposed. The algorithm uses two maps, namely, a motion map and a magnetic field map. The motion map captures typical motion patterns of pedestrians in buildings that are constrained by e.g. corridors and doors. The magnetic map models local magnetic field anomalies in the environment using a Gaussian process model and uses them as position information. These maps are used in a Rao-Blackwellized particle filter to correct the pedestrian position and orientation estimates from the pedestrian dead-reckoning. The pedestrian dead-reckoning is computed using an extended Kalman filter with zero-velocity updates. The algorithm is validated using experimental sequences and the results show the efficacy of the algorithm in localizing pedestrians in indoor environments.@en

In this work, our focus is on indoor localization using the indoor magnetic field as a source of position information. This relies on the fact that ferromagnetic materials inside buildings cause the magnetic field to vary spatially. We jointly estimate the pose of a combined sensor module (containing a magnetometer) as well as the magnetic field map. We show that our previously developed algorithm for magnetic field-based simultaneous localization and mapping can be adapted and extended into a general framework where a multitude of measurements can be included. We exemplify this using a foot-mounted inertial measurement unit where we additionally assume the availability of range measurements.@en