Terraced houses built in the Netherland after 1980 are often characterized by the use of large units connected at corners by continuous thin layer mortar joints. Unlike the running bond pattern, usually modelled as a rigid connection, the vertical continuous connection may fail in shear and influence the global seismic capacity of the entire building. This work aims at investigating and comparing different numerical modelling approaches for simulating the vertical connections. Two different constitutive models are adopted to simulate the quasi-brittle nonlinear behaviour of the continuous joint, and their advantages and limitations are pointed out in terms of robustness and accuracy. The study considers both the component level in terms of U-shaped pier-wall configuration, and the full-scale structural level in terms of the global capacity for a two-storey masonry house assemblage, characterized by a running bond arrangement. The results of this work show that the shear failure involving the continuous joint usually reduces the strength capacity of the structure. Both the selection of constitutive models for the connection interface and masonry material are demonstrated to affect the results significantly. Decoupled direct traction-displacement relations for the interfaces appear to provide more robust results than coupled plasticity-based Coulomb friction laws. The selection of either a pre-fixed orthotropic smeared crack model for the masonry or a standard isotropic concrete-like rotating smeared crack formulation is demonstrated to strongly influence the activation of the different failure mechanisms and hence the response of the structure.

@en

Since the 1980s, calcium silicate element masonry has been commonly used in Dutch buildings, and vertical continuous joints have been usually located at the corner of perpendicular walls. Since the shear failure of these joints may significantly reduce the seismic performance of the flanged wall and therefore of the entire building, the assumption of rigid connection may be inaccurate, unlike for the traditional interlocking of bricks in running bond textures. In this paper, analytical and numerical approaches to study the failure of vertical joints in the seismic assessment of URM buildings are presented. The first part of the work focuses on two different numerical models to study the nonlinear behaviour of the vertical connection; the related critical numerical issues are then discussed. The second part introduces an analytical method able to estimate the lateral force–displacement curve of a flanged wall, which considers the possible failure of the connection. In particular, the method is derived from the section analysis approach developed for controlled rocking deformable systems. The comparison between the numerical simulations and the analytical method proves the capacity of the latter to provide a quick but sufficiently accurate estimate of the force–displacement curve of a URM U-Shaped wall.

@en

In recent years, the seismic risk in the north of the Netherlands has increased due to gas extraction. Since 2014, the Delft University of Technology started a research program to assess the seismic response of unreinforced masonry (URM) buildings. The Dutch URM buildings are characterized by slender piers and transverse walls. In common practice, the connections between piers and transverse walls are often modelled as rigid, but in real structures these connections may exhibit different behaviour. Especially, since the 1980s, calcium silicate element masonry has been commonly used in Dutch buildings, and vertical continuous joints are present between transverse walls. For this reason, it appears essential to assess the connection strength properties, since its failure can significantly reduce the seismic performance of the entire structure. The first part of this work investigates and compares different numerical approaches to describe the nonlinear behaviour of masonry under lateral loads, simulating seismic action. The second part specifically focuses on the critical issues related to the modelling of vertical connections of Dutch URM buildings. A sensitivity study of the frictional parameters is performed to analyze the influence of the strength of the glued connection on the global response of the URM structure.@en