Microstructure formation in tow spreading

Microstructure formation in tow spreading

Singh, Palak (TU Delft Aerospace Engineering)

Dransfeld, C.A. (mentor)
Atli-Veltin, B. (mentor)
Çağlar, B. (mentor)

Delft University of Technology

Aerospace Engineering

2021-11-17

In recent years, lightweight composites have become increasingly popular in several industries for the benefits they offer such as high strength to weight ratio, cost efficiency, tailorable properties and superior mechanical performance. The performance of these lightweight composites can be further optimized by using spread tows as a reinforcement solution. Tow spreading is a process of flattening fibre tows into thinner and wider tapes with a low aerial weight which increases resin impregnation of fibres, lowers void content in impregnated tows and produces lightweight composites with improved damage tolerance.

The majority of tow spreading technology however is owned by companies in the form of intellectual property and patents thus limiting the scientific understanding of the process. This aspect leaves tow spreading open as a field of research for exploration and investigation. While some previous studies have investigated the process of tow spreading, the applicability of these studies has so far been limited in their experimental apparatus. These studies identified the gap that exists between the sophisticated industrial technology and the research setups hence providing an incentive to further develop an experimental facility that generates a deeper understanding of the current industrial practices in tow spreading.

In this research, a mechanical tow spreader was developed that utilizes cylindrical spreader bars to facilitate the spreading of fibres. This was followed by an experimental analysis where different input parameters in the tow spreader such as tension, spreader bar orientation, heat and speed among others were investigated to understand their influence on spreading behaviour. Lastly, a microstructural investigation of spread tow was conducted where a technique to capture the spread of fibres in the tow was developed and microstructural samples were generated. These samples were then observed under a microscope to visualize the evolution of fibre distribution as the tow spreads.

Microstructure
Fibre spreading
Composites
Aerospace structures

http://resolver.tudelft.nl/uuid:b1273070-ba0d-4c0f-8ab4-4ad6b2666378

Student theses

master thesis

© 2021 Palak Singh