Environmental trade-offs of aerostructures

Environmental trade-offs of aerostructures: A prospective lifecycle assessment of wing ribs

Arblaster, Thomas (TU Delft Aerospace Engineering; TU Delft Technology, Policy and Management)

Villegas, I.F. (mentor)
Steubing, Bernhard (mentor)
Teuwen, Julie J.E. (graduation committee)
Dedoussi, I.C. (graduation committee)

Delft University of Technology

Aerospace Engineering

2023-09-27

Emerging in the domain of composite manufacturing, thermoplastic polymers can enable the reduction of process times, costs, and waste. In this study, lifecycle assessment (LCA) is used to evaluate a design for a carbon fibre-reinforced thermoplastic (CFRTP) wing rib, made from carbon fibre and polyetherketoneketone (CF/PEKK). The CF/PEKK rib is compared to several hypothetical alternatives, considering autoclave and resin transfer moulding of CF/epoxy and milled aluminium alloy.

The comparison uses novel and state-of-the-art techniques. Using scenario analysis, several perspectives are considered: recyclability, mass-induced energy demand, and alternative energy carriers. The analysis of energy carriers and end-of-life processes incorporates prospective methods to explore the effects of the energy transition. Across these scenarios, it was found that, when there is a mass difference among alternatives of 2% or more, the lighter alternative will be preferred, regardless of other factors. Through sensitivity analyses, potential was found for this margin to grow to 3% under extreme conditions, and to around 5-10% when shifting the whole lifecycle into the future. When dealing with smaller mass differences, material production and manufacturing waste become distinguishers of environmental performance.

These insights are valuable when exploring novel materials and manufacturing methods for commercial aviation. The approach defined in this thesis can be extended to any other application which has a lightweighting imperative, such as automotive, shipping, rail, or wind turbines. Building on this thesis, guidance can be provided on how and where to apply novel materials across multiple product lifecycles.

Aviation
Lightweighting
CFRP
Thermoplastic composites
Aluminium alloys
Life Cycle Assessment
LCA
ex-ante LCA
Scenario analysis
Environmental impact
Sustainability

http://resolver.tudelft.nl/uuid:8e4ca28b-134f-402b-80ea-f3e8f1fc63db

Student theses

master thesis

© 2023 Thomas Arblaster