Inland ship stern optimization in shallow water

Rotteveel, E.; Hekkenberg, R.G.; van der Ploeg, Auke

Inland ship stern optimization in shallow water

Journal article (2017)

Authors

E. Rotteveel Ship Design, Production and Operations - Mechanical, Maritime and Materials Engineering

R.G. Hekkenberg Ship Design, Production and Operations - Mechanical, Maritime and Materials Engineering

Auke van der Ploeg Maritime Research Institute Netherlands (MARIN)

Research Group

Ship Design, Production and Operations (Mechanical, Maritime and Materials Engineering) (TU Delft)

Shallow water Surrogate modeling Inland ships Hull form optimization Restricted water Ship propulsion power

To reference this document use:

http://resolver.tudelft.nl/uuid:e1cbd390-44ab-4e85-9e48-aab5b2c320e7

More Info

expand_more

Published Date

2017

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Mechanical, Maritime and Materials Engineering

Department

Marine and Transport Technology

Research Group

Ship Design, Production and Operations

Abstract

Inland ships continuously operate in restricted waters, where the depth and width are regularly less than twice the ship's draft and four times ship breadth, respectively. In restricted water, the flow around the hull changes compared to that in unrestricted water due to presence of the fairway bottom and sides, that lead to increased return flow, stronger squat effects and changes in the wave pattern produced by the ship. If these changes to the flow are significant, it is worthwhile to optimize the hull form for shallow or confined water rather than for unrestricted water. This paper specifically focuses on the effects of water depth on inland ship stern optimization. It presents the optimization of propulsion power for various water depths using a parametric inland ship stern shape, CFD and surrogate modeling. The change of parameter influence in different water depths is analyzed and explained by means of flow visualization. Using Pareto fronts, a trade-off is shown: propulsion power in shallow water can be decreased at the cost of increased propulsion power in deep water and vice versa.

Files

1_s2.0_S0029801817303232_main.... (pdf)

(pdf | 3.29 Mb)

Unknown license

Download not available