Coupling Factor Estimation for Electrical Vehicles Wireless Charging

Master thesis (2022)

Authors

H. Song Electrical Engineering, Mathematics and Computer Science

Contributors

J. Dong DC systems, Energy conversion & Storage - EEMCS (mentor)
M. Cvetkovic Intelligent Electrical Power Grids - EEMCS (graduation committee member)
C. Riekerk DC systems, Energy conversion & Storage - EEMCS (mentor)
P. Bauer DC systems, Energy conversion & Storage - EEMCS (graduation committee member)
Faculty
Electrical Engineering, Mathematics and Computer Science, Electrical Engineering, Mathematics and Computer Science
Copyright: © 2022 Hongjie Song
More Info
expand_more

Published Date

15-09-2022

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Electrical Engineering, Mathematics and Computer Science

Abstract

With the popularity of electrical vehicles (EVs), the demand for EVs charging is also increasing. Compared to traditional wired charging, wireless charging can avoid many safety issues. The efficiency of wireless power transfer (WPT) system is determined by many factors, the coupling factor is one of the most important factors. Therefore, estimating the coupling factor of WPT system is necessary. The research objectives of this work are to review and benchmark different methodologies of coupling factor estimation. Besides, a comprehensive method is selected and simulated. This work is focused on magnetic inductive WPT systems. Five different methodologies of coupling factor estimation for static WPT system and one methodology for dynamic WPT system is reviewed and analyzed. The methodology that uses alternative capacitors to estimate the coupling factor of a static WPT system is analyzed in detail. By using the zero crossing unit, the primary side and secondary side of WPT system are under full resonant. The WPT system will work in two different modes by changing the primary side capacitance. The two sets of circuit parameters will be recorded and calculated by a PLL unit. Based on theoretical analysis and the calculated parameter, the load and mutual inductance of WPT system can be identified. Therefore, the value of the coupling factor can be determined. The accuracy of coupling factor estimation of this methodology is higher than 97 %.
Compared to the literature that proposed this methodology, this work made a sensitivity study. The circuit parameters are made to fluctuate in a certain range. The accuracy of estimation of mutual inductance is still higher than 95% when the primary side resistance, secondary side resistance and load fluctuate. However, the system becomes unstable when the primary side capacitance, inductance and secondary side inductance fluctuate. The reason is that when the capacitance and inductance change, the operating frequency will deviate from the resonant frequency. However, the mutual inductance identification unit is not able to detect this deviation. If the deviation of circuit parameters is updated, the accuracy of coupling factor estimation will remain at about 97%.

Files

Hongjie.pdf
(pdf | 4.51 Mb)
Unknown license