Flow rate measurement in stacks with cyclonic flow – Error estimations using CFD modelling

Journal article (2018)

Authors

J. Geršl Czech Metrology Institute
S. Knotek Czech Metrology Institute
Z. Belligoli Aerodynamics - Aerospace Engineering
R.P. Dwight Aerodynamics - Aerospace Engineering
R.D. Robinson National Physical Laboratory
M. D. Coleman National Physical Laboratory
Research Group
Aerodynamics (Aerospace Engineering) (TU Delft)
More Info
expand_more

Published Date

2018

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Aerospace Engineering

Department

Flow Physics and Technology

Research Group

Aerodynamics

Abstract

Two methods of flow measurement in stacks are investigated to determine their errors in presence of cyclonic flow. One method – based on velocity measurements with a Pitot tube in a grid of points – is the standard reference method according to EN ISO 16911-1. The second method – ultrasonic flow measurement – is often used as the automated measurement system in stacks according to EN ISO 16911-2. Several typical stack configurations are considered and the flow field in the stacks is obtained using validated computational fluid dynamics (CFD) modelling with OpenFoam software. We show that possible errors of the standard reference method due to the cyclonic flow are significant compared to the requirements of the EU's Emissions Trading System. For the ultrasonic flow meter we compare various configurations (number, orientation, position) of the ultrasound beams and we demonstrate the flow profile pre-investigation by CFD as prescribed in section 8.3 of EN ISO 16911-2.

Files

1_s2.0_S026322411830558X_main.... (pdf)
(pdf | 6.66 Mb)
Unknown license

Download not available