The Influence of Thin Dielectric Coatings on LI and AC Breakdown Strength in SF6 and Dry Air

van der Born, D.; Morshuis, P.H.F.; Smit, J.J.; Girodet, A

The Influence of Thin Dielectric Coatings on LI and AC Breakdown Strength in SF6 and Dry Air

Conference paper (2013)

Authors

D. van der Born Intelligent Electrical Power Grids -

P.H.F. Morshuis Intelligent Electrical Power Grids -

J.J. Smit Electrical Engineering, Mathematics and Computer Science

A Girodet Alstom Grid

Research Group

Intelligent Electrical Power Grids () (TU Delft)

GIS Breakdown strength SF6 AC Lightning impulse Thin coating Dry air

To reference this document use:

http://resolver.tudelft.nl/uuid:55d9f10d-8091-43bf-9b8f-b37b79ce58a6

More Info

expand_more

Published Date

2013

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Electrical Engineering, Mathematics and Computer Science

Department

Electrical Sustainable Energy

Research Group

Intelligent Electrical Power Grids

Abstract

Electric power consumption has increased over the years while the available space for substations has become smaller. Newly designed gas insulated switchgears (GIS) have to be smaller and have to operate at a higher system voltage. Furthermore, the urge to decrease the use of SF6 as an insulating gas in GIS is becoming larger because of the high production and handling costs and the high global warming potential. Unfortunately, the breakdown strength of alternative gases is usually lower than that of SF6. However, with the application of a coating on the electrodes in GIS the breakdown strength can be improved. In this paper, the performance of GIS with thin coatings is evaluated with breakdown tests. The test setup consists of a rodplane electrode arrangement with a coated rod electrode. The coatings vary in thickness between 40 micrometers and 2 millimeters. The breakdown tests are performed at either 50 Hz AC or lightning impulse voltage.