Experimental investigation of wave interaction with a thin floating sheet

Abstract

Flexible floating structures received increasing attention in recent years as support structures for floating offshore solar installations and other forms of oceans space utilization. An early example for such structures was the Mega-Float structure proposed as floating airport runway for Tokyo Bay. More recent examples can be found in the large inland floating solar parks where interconnected pontoons form a flexible floating structure. The common denominator of these structures is their small height compared to their length and width resulting in low bending stiffness in the vertical direction. Structural length being much longer than the wavelength and low bending stiffness result in large vertical deflections of the floating structures and strong hydroelastic interaction with the waves. Similar behavior can be observed for sloshing mitigation measures with flexible membranes. In this study, we investigated the wave structure interaction of a floating flexible sheet with a length to height ratio of 1000 in regular long-crested head waves in the small towing tank of Delft University of Technology. Wavelength was varied between 1/20 and 1/5 of structure length with wave steepness in the range of 0.02 to 0.05. Digital Image Correlation (DIC) was used to measure the surface elevation of the entire structure and wave elevation was measured in three different locations to provide reference data. The results show that the floating sheet mainly followed the local wave elevation and a reduction of motion amplitude was observed over the length of the structure. Further, the results reveal 3D effects of different elevation amplitude across the width of the sheet, which suggests strong interaction with the waves.