Long term measurements in the Woerden geosynthetic-reinforced pile-supported embankment

Journal article (2020)

Authors

Arching Geosynthetic reinforcement Geosynthetics Field monitoring Piled embankments Load transfer platforms Full-scale field test

To reference this document use:

http://resolver.tudelft.nl/uuid:336ab1ec-80e8-43c9-9d01-c632b13ee8b2

More Info

expand_more

Published Date

2020

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Abstract

The purpose of this paper is to present long-term measurements in a full-scale study on a basal reinforced piled embankment that make it possible to validate calculations used for the design of the geosynthetic reinforcement (GR). These calculations are normally carried out in two steps. To validate steps 1 and 2 together, it is necessary to measure GR strains. To validate calculation steps 1 and 2 separately, arching A needs to be measured, which is the pressure on the pile cap above the GR. An extensive monitoring project was conducted over a period of four years, in a basal reinforced piled embankment on 17 m of soft clay and peat. This study presents the measured GR strains and load distribution including arching, accompanied by measured groundwater levels and deformations. The subsoil support of the geosynthetic reinforcement disappeared quickly, arching developed over the first three months, and an annual cycle in the load distribution became apparent. Arching effects increase during the summer when conditions are relatively dry, resulting in a larger load on the piles and a reduction in the load on the GR. Additionally, the measured changes after an extremely rainy week are presented.