On the rheological characterisation of liquefied sands through the dam-breaking test

Abstract

This paper concerns the rheological characterisation of liquefied sands as non-Newtonian Bingham fluids. For this purpose, dam-breaking laboratory tests are often executed and interpreted, offering a viable option to identify the properties of fluidised water-soil mixtures. However, limited attention has been devoted so far to clarify what variables and measurements would allow unambiguous calibration of Bingham parameters, namely, the viscosity η and the yield stress τ
_y
. The numerical results of parametric studies based on the particle finite element method (PFEM) are critically inspected to gain deeper insight into the problem. First, it is confirmed that multiple η − τ
_y
pairs may reproduce the same experimental evidence when formed by only one measurement—usually, the post–dam-breaking displacement of the bottom toe (tip) of the liquefied mass. Then, two alternative procedures are proposed for unambiguous identification of both η and τ
_y
: one is based on monitoring the evolving aspect ratio of the fluid mass during free, gravity-driven flow; the other relies on a slightly different dam-breaking test, also including impact against a rigid obstacle. In particular, the latter approach reduces the relevant duration of the test, reducing the possible influence of reconsolidation effects on the calibration of rheological parameters.