In situ acoustic characterization of a perforated panel on a cavity by means of PU measurement and model fitting

Briere de La Hosseraye, Baltazar; Yang, Jieun; Hornikx, Maarten

In situ acoustic characterization of a perforated panel on a cavity by means of PU measurement and model fitting

Journal article (2024)

Authors

Baltazar Briere de La Hosseraye Eindhoven University of Technology

Jieun Yang Eindhoven University of Technology

Maarten Hornikx Eindhoven University of Technology

Affiliation

External organisation

Surface impedance Absorption coefficient Acoustic characterization Model fitting In situ measurements PU probe

To reference this document use:

http://resolver.tudelft.nl/uuid:10c92e9c-ecbb-4509-ad15-d70d7844447f

More Info

expand_more

Published Date

2024

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Affiliation

External organisation

Abstract

The in situ characterization of materials is a crucial challenge in room acoustics, as laboratories measurement cannot always be applied in consultancy practices. In particular, there is a lack of method to characterize in situ systems with perforated facings, which are commonly encountered systems in room acoustics. In this paper, the in situ characterization of a rigidly-backed porous material behind a rigid perforated facing by means of pressure–velocity measurements is presented. The method includes an inverse impedance model fitting based on measurement in a limited frequency range. The applicability of this method was studied by measuring a variety of perforated facings, whether in front of an air cavity or backed by a porous layer, and comparing the obtained impedance model parameters to reference values. Good agreement was observed between the retrieved parameters and the references, with the errors in all retrieved parameters moving mass, facing thickness, cavity depth, porous layer thickness and porous layer flow resistivity not exceeding 15%.