Ultra-wideband indoor propagation channel measurements, analysis and modeling

Conference paper (2006)

Authors

Z. Irahhauten International Research Centre for Telecommunication and Radar
A Yarovoy Microwave Technology and Systems for Radar
G.J.M. Janssen Wireless and Mobile Communications
H. Nikookar Microwave Technology and Systems for Radar
L.P. Ligthart Microwave Technology and Systems for Radar
Research Group
International Research Centre for Telecommunication and Radar
More Info
expand_more

Published Date

2006

Language

Undefined/Unknown

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Research Group

International Research Centre for Telecommunication and Radar

Abstract

In this paper, the results of Ultra Wide Band (UWB) measurements carried out in indoor environments are presented and a statistical propagation model for the UWB channel covering the frequency band from 3.1. to 10.6 GHz is proposed. The measurements have been performed in the time domain by exciting the channel with very short pulses of 50 ps width. Both Line-of-Sight (LOS) and on-Line-of-Sight (NLOS) propagation with a maximum distance of 10 m are considered. INspection of measeured data after processing shows that the multipath components of the UWB channel tend to arrive in clusters. Therefore, the Salch-Valenzeula (S-V) model has been adopted as starting point for our modelling analysis. Important channel parameter statistics of the model are extracted from the measured data. The obtained results show some discrepancies with respect to the IEEE channel model. The results presented here illustrate that the conventional singel Poisson proces is not sufficient to model the cluster and ray arrival times. Therefore, a Gamma distribution is proposed to model the cluster inter-arrival times and a mixture of two Poisson processes to model the ray intra-arrival times. It is found that the amplitude fading statistics can be modelled by the Log-normal distribution with a standard deviation decreasing linearly with the excess delay. Other parameters like cluster and ray power decay constants are determined to complete the statistical UWB channel model.