Experimental research on self-amplifying density waves in horizontal pipelines of two phase granular slurries

Abstract

Self-amplifying density waves in hydraulic transport pipelines is a scarcely researched topic. Density waves are in essence the result of a spatial redistributing effect and clustering of solids in hydraulic transport pipelines. Self-amplifying density waves are very undesirable for practical applications, as these waves increasing the risk of pipeline blockages. The two available experimental studies (Talmon et al., 2007; Matoušek and Krupička, 2013) report conflicting properties of the density waves, such as wave length and wave celerity. This new experimental research aims to shed light on the reported differences, by broadly varying particle size and concentration in a new dedicated experiment. The main highlight of this research is that two separate mechanisms were identified that can cause density waves, and Talmon et al. (2007) and Matoušek and Krupička (2013) in hindsight were studying the two different mechanism respectively. Both wave type mechanisms come into effect at mixture velocities close to the deposit limit velocity, and require a stationary bed layer to initiate. The first mechanism is caused by an imbalance of erosion and sedimentation of the bed layer, which is predominant for fine sand particles (∼242μm and ∼308μm in this research). The second mechanism occurs when the bed layer starts sliding, instead of being eroded, and is specific for larger sand sizes (∼617μm and ∼1.08mm in this research). These two mechanisms are clearly distinguishable, having different wave lengths, celerity, amplitudes and amplification rates. The results also show a clear relationship between the mean concentration of a density wave, the wave amplitude and wave celerity specific for each of the two mechanisms.