JD

J Duszczijk

49 records found

Electroless NiP composite coatings on aluminium: Substrate pretreatment.

Thermal conductivity of metal powder - polymer plastisol.

Study on the characteristics of the diffusion between the as-reaction-formed Ni3Al intermetallic compound and pure nickel for interfacial bonding.

Investigation into the process parameters of liquid phase sintering to prepare an AA2014-based composite from an elemental powder mixture.

Processing of in-situ Al-TiB2 composites.

3D FEM simulation of the thermal events during AA6061 aluminium extrusion.

Powder injection moulding of the BASF 316L feedstock - Numerical simulation and experimental verification of the process.

P/M Al-2OSi3Cu-1Mg alloy with SiC reinforcement.

P/M production of Ni3Al matrix composites strenghtened by rounded TiC particles.

Tribological behaviour of Al-Si-Al2O3 composites.
Conference paper (1998) - D Bialo (author), J Duszczijk (author)

DEFORM 3D(TM)-limitations.

PIM technologie in Nederland, Sintertechnieken.
Report (1998) - J Duszczijk (author)

Full dense processing of in-situ aluminium based MMCs.

Poederspuitgieten en kunststof.

An FEM analysis of the mechanical and physical response of aluminium in extrusion.

The characteristics of the processing and performance of the Al-4.5Cu-SiC composites added with graphite and prepared from elemental powders.

Determination of temperature evolution during the extrusion of AA6061 alloy using 3D FEM modelling.

Preparation of Al-20Si-4.5Cu alloy and its composite from elemental powders.

Structure formation of in-situ Al-TiB2 composites.

The influence of matrix alloying elements on the reactive synthesis of Al2124 alloy metal matrix composites.