Photovoltaic technology has become one of the leading renewable alternatives for energy production. One main factor in the diminished performance of a photovoltaic module is partial shading, due to the resulting mismatch conditions in the module. However, it is difficult to understand how a specific PV module reacts to shading in comparison with others, as currently the ability of a module to withstand shading is usually expressed in vague qualitative terms on its datasheet. In this work, the development of a shading tolerability calculator in MATLAB was completed. This tool can relatively easily and quickly calculate the shading tolerability of a module as a numeric parameter (ST), which can then be used for characterization and comparison purposes.

First a MATLAB based model to simulate the IV characteristics of a PV module under different conditions (including partial shading) was developed. The model was developed at a cell level, and was translated to a module level by taking the series connection of cells into account, and modeling the impacts of reverse bias and bypass diodes operation. Validation with experimental data showed errors at Pmpp remained below 4.5%.

Next, the shading scenarios to be considered were defined and developed. The objective was to determine Pmpp of a given PV module under all possible shading scenarios, using the IV simulation model developed. The possible shading scenarios were based on a PV module split into 12 equal sections, and considering two irradiance levels: 100 W/m2 for shaded sections, and 1000 W/m2 for unshaded. To improve the speed of the model, which was an important aim within this project, the existence of equivalent scenarios based on the symmetry of the module was utilised. The Pmpp value was only simulated once for every unique scenario, greatly reducing the required number of simulations and simulation time.

Based on the above, the development of a calculator for the shading tolerability parameter of a PV module was accomplished. The ST values for more than 40 PV modules were calculated, giving ST% values ranging between 22% and 29%. Correlations between different module parameters were explored to see their impact on ST. One main result seen was the impact of bypass diodes on ST, specifically the considerable positive effect of a higher number of bypass diodes. Another was the positive correlation between temperature coefficient of open circuit voltage and ST.

Finally, a case study for the calculation of ST for a half-cell butterfly module was implemented. This involved modeling parallel connections in PV modules, as well as updating the IV simulation model to include this new type of PV module configuration. The ST values for two half-cell butterfly modules were calculated, giving ST% values of around 42%. This was significantly higher than those calculated for the conventional modules, highlighting the improved shading tolerance of half-cell butterfly modules. The adaptability of this model to be able to calculate the shading tolerability of any type of configuration of PV module was also demonstrated through this case study, paving the way for future research.