Searched for: subject%3A%22in%255C-plane%22
(1 - 20 of 169)

Pages

document
Sousamli, M. (author)
There is a very popular fable, dating back to the early 1800s, about three little pigs that build their houses of different materials and a wolf that tries to catch them by blowing down their houses. From the three houses built from straws, sticks or bricks, only the house made out of bricks withstands the blow of the wolf. Although the moral of...
doctoral thesis 2024
document
Zhang, H. (author)
In recent decades, dielectric lens antennas have been more and more adopted and developed for sensing and imaging applications at sub-millimeter (sub-mm) wavelengths because they can achieve high gain while keeping their physical size and weight acceptable at these wavelengths. More recently, as low-loss and low-cost lens materials have become...
doctoral thesis 2024
document
Thorbecke, J.W. (author), Almobarak, Mohammed (author), van IJsseldijk, J.E. (author), Brackenhoff, Joeri (author), Meles, Giovanni (author), Wapenaar, C.P.A. (author)
The Marchenko algorithm can suppress the disturbing effects of internal multiples that are present in seismic reflection data. To achieve this, a set of coupled equations with four unknowns is solved. These coupled equations are separated into a set of two equations with two unknowns using a time window. The two unknown focusing functions can...
journal article 2024
document
Zhang, Muhan (author)
Recently, there has been an increasing demand for security in public places. As a result, non-destructive and fast millimetre-wave and submillimetre-wave imaging systems have gained more and more attention.<br/>This project is based on Concealed Objects Stand-off Real-Time Imaging for Security (CONSORTIS), which is a European next-generation...
master thesis 2023
document
Jain, Uday (author)
Masonry structures occupy a significant share of the current building stock due to widespread material availability and cost-effectiveness. Regions with high seismicity, like the Himalayas, have typically developed local seismic culture over the centuries. This has led to improved construction techniques providing an enhanced seismic performance...
master thesis 2023
document
Tao, Jack (author)
With the development of 5G/6G communication technology, an increasing number of communication protocols for data transmission are created and implemented. At the same time, the redundancy of packet headers has become a matter to be optimized when transferring packets across different protocol layers, which causes high resource occupancy, low...
master thesis 2023
document
Sharma, Sudaya (author)
Previous earthquake reports have highlighted the high vulnerability of masonry walls to failure when subjected to the out-of-plane (OOP) loading. Particularly, this OOP failure is a significant cause of collapse in unreinforced masonry (URM) buildings, especially those with slender walls and large openings. Moreover, in the past they were...
master thesis 2023
document
Jugariu, Timo (author)
An all-important step in the ambitious pursuit towards autonomous networks has been the introduction of Software Defined Networking which has advocated the concept of separating a network’s control plane from the data plane and creating a programmable controller with a wider view of the network. This innovation proved to be very promising, but...
master thesis 2023
document
Larocque, Frédéric (author)
Pitot tube-free airspeed estimation methods exist for fixed-wing and multirotor configurations, but lack direct applicability to hybrid unmanned air vehicles due to their wide flight envelope and changing dynamics during transition. This work proposes a novel synthetic air data system for the Variable Skew Quad Plane (VSQP) hybrid vehicle to...
master thesis 2023
document
van den Brink, Rick (author)
Fast and accurate diagnosis of illnesses or other health complications is not accessible in many locations around the world. Due to this, illnesses are unnecessarily left untreated. Therefore, AiDx Medical has developed a portable automated diagnostic microscope with re liable and rapid AI-assisted detection specifically for low-resource...
master thesis 2023
document
van Kouwen, Mathijs (author)
In existing standards for photovoltaic (PV) plants, little guidance is provided in the spatial allocation of pyranometers. No universal and easily scalable algorithms exist that help designers of monitoring infrastructure in solar parks choose the most representative positions for irradiance sensors. <br/><br/>To fill this gap, a software tool...
master thesis 2023
document
Bölger, Matthijs (author)
Stability assessment for dikes and dike reinforcement requires insight in soil strength behaviour. The required parameters for this assessment are typically obtained from conventional laboratory tests. These conventional tests are not performed under conditions found in the field. For example, a dike section resembles to plane strain conditions....
master thesis 2023
document
Joshi, Amey (author)
The light and frequent earthquakes in the north of the Netherlands, particularly in the province of Groningen, have recently exposed the unreinforced masonry structures to seismic activities. Since these structures do not adhere to seismic regulations, they are considered vulnerable to seismicity. The ultimate state capacity of the structures is...
master thesis 2023
document
Gaggero, M.B. (author), Korswagen, Paul A. (author), Esposito, R. (author), Rots, J.G. (author)
Innovative solutions for seismic-retrofitting existing structures are currently required, as often traditional strategies are expensive, non-reversible, highly invasive, and/or fail to address both serviceability and ultimate limit states together. The present paper describes a preliminary experimental campaign performed at TU Delft to...
journal article 2023
document
De Ponti, T.M.L. (author), Smeur, E.J.J. (author), Remes, B.D.W. (author)
This paper presents the design of an Incremental Nonlinear Dynamic Inversion (INDI) controller for the novel, patent pending (NL 2031701) platform Variable Skew Quad Plane (VSQP). Part of the identified challenges is the development of a model for the actuator effectiveness and lift especially as a function of skew, the newly added degree of...
conference paper 2023
document
Chatzieleftheriou, Livia Elena (author), Gramaglia, Marco (author), Camelo, Miguel (author), Garcia-Saavedra, Andres (author), Kosmatos, Evangelos (author), Gucciardo, Michele (author), Soto, Paola (author), Iosifidis, G. (author), Fuentes, Lidia (author)
The quest for autonomous mobile networks introdu-ces the need for fully native support for Network Intelligence (NI) algorithms, typically based on Artificial Intelligence tools like Machine Learning, which shall be gathered into a NI stratum. The NI stratum is responsible for the full automation of the NI operation in the network, including...
conference paper 2023
document
Murano, Antonio (author), Mehrotra, A.A. (author), Ortega, Javier (author), Rodrigues, Hugo (author), Vasconcelos, Graça (author)
This work compares the ability of different numerical modelling approaches to simulate the out-of-plane behaviour of two-leaf stone masonry walls with different masonry bond configurations: an irregular drystone stone masonry wall and a masonry wall with roughly cut regular stone units. Finite element modelling, considering both a micro and...
journal article 2023
document
Mancinelli, A. (author), Remes, B.D.W. (author), de Croon, G.C.H.E. (author), Smeur, E.J.J. (author)
Hybrid Unmanned Aerial Vehicles UAV are vehicles capable of take-off and landing vertically like helicopters while maintaining the long-range efficiency of fixed-wing aircraft. Unfortunately, due to their wing area, these vehicles are sensitive to wind gusts when hovering. One way to increase the hovering wind-rejection capabilities of hybrid...
journal article 2023
document
Miyatake, Tetsuya (author), Kawaguchi, Kenichi (author), Ohtomo, Manabu (author), Iwai, Toshiki (author), Ishiguro, Tetsuro (author), Doi, Yoshiyasu (author), Hermias, J. (author), Nur, S. (author), Ishihara, R. (author), Sato, Shintaro (author)
Surface-activated direct bonding of diamond (100) and c-plane sapphire substrates is investigated using Ar atom beam irradiation and high-pressure contact at RT. The success probability of bonding strongly depends on the surface properties, i.e, atomic smoothness for the micron-order area and global flatness for the entire substrate....
journal article 2023
document
Qian-Qian, Li (author), Mosleh, Yasmine (author), Alderliesten, R.C. (author), Hong-Hua, Zhang (author), Wei, Li (author)
To comply with the trend in the development of engineering materials towards lightweight, high strength, eco-friendly, sustainable, and multi-functional, a three-dimensional braided integrated composite honeycomb is designed. The effects of geometrical parameters particularly joint wall lengths on the in-plane mechanical behavior of the...
journal article 2023
Searched for: subject%3A%22in%255C-plane%22
(1 - 20 of 169)

Pages