An airbrush 3D printer

An airbrush 3D printer: Additive manufacturing of relaxor ferroelectric actuators

IJssel de Schepper, S.R. (TU Delft Micro and Nano Engineering)
Hunt, A. (TU Delft Micro and Nano Engineering)

2024

The additive manufacturing of electroactive polymer (EAP) devices poses significant challenges due to their distinct structure and dissimilar properties of their constituent materials. It requires deposition of multiple functional materials with different properties, achieving μm-scale resolution in layer thickness, and executing incremental deposition and curing steps while preserving the previously deposited functional material layers. This study introduces an airbrush 3D printer concept and employs it for fabricating EAP transducers. An airbrush 3D printer was constructed by adapting a standard extrusion printer platform and integrating it with a two fluid atomizer (i.e. an airbrush) as the deposition tool. A process was developed for printing of the bending P(VDF-TrFE-CTFE) actuators with carbon black electrodes, and actuators with a single and dual EAP layers were fabricated. The airbrush printer attained in-plane resolution of 0.5mm, thickness resolutions of 0.63 μm and allowed atomizing up to 7% P(VDF-TrFE-CTFE) solutions. The 18 mm × 4 mm EAP actuators achieved 340μm (440 V_pp) and 3.7 mm (400 V_pp, 104 Hz) tip deflections respectively in quasi-static and resonant operation. Airbrush printing therefore proved to be a robust method for printing precursor materials with a wide range of properties, and is anticipated to be a versatile approach for printing other passive and stimuli-responsive materials and devices.

Additive manufacturing
Airbrush 3D printer
Electroactive polymer
Smart material actuator
Spray printing

http://resolver.tudelft.nl/uuid:0dadd35f-2705-4fa8-a00e-837cc47d18e3

https://doi.org/10.1016/j.addma.2024.103982

2214-8604

Additive Manufacturing, 81

Institutional Repository

journal article

© 2024 S.R. IJssel de Schepper, A. Hunt